My Account
My Cart (0)
Home > Mirrors > Redi-Set-Go® Mirror Replacements
<b>Heated Redi-Set-Go®</b>

Heated Redi-Set-Go®

<b>Redi-Set-Go® attaching to actuator</b>

Redi-Set-Go® attaching to actuator

<b>Redi-Set-Go® retail box</b>

Redi-Set-Go® retail box

<b>Redi-Set-Go® #5389RSG Dodge Challenger</b>

Redi-Set-Go® #5389RSG Dodge Challenger

<b>Heated/Signal Redi-Set-Go®</b>

Heated/Signal Redi-Set-Go®

Redi-Set-Go® Mirror Replacements

Redi-Set-Go® Motor Mounted Replacement Mirrors

Burco Redi-Set-Go® mirror replacements consist of a Redi-Cuts® mirror replacement with a pre-applied motor mount. The motor mount attaches directly onto your mirror head's actuator. Redi-Set-Go® mirror replacements are an ideal choice if your backing plate is broken or missing. Redi-Set-Go® mirror replacements eliminate the need to remove broken glass, making for a quick and easy install.

Please view our mirror catalog for specific Redi-Set-Go® product offerings for your vehicle.

  • Made in the USA
  • Pre-applied motor mount
  • Rimless for increased visibility
  • Safety smooth edges
  • Exact-Fit Guaranteed
  • Break-Free Guarantee™ terms apply
Specs & Installation Mirror Catalog Find a Retailer/Installer Buy Now (B2B)

Redi-Set-Go® mirror replacements are offered for the majority of popular vehicles. Shape, functionalities, and size must be verified prior to choosing the correct Redi-Set-Go®. Please reference the "before you buy section." We do our best to offer solutions and coverage for your vehicle!

Important things to know:

  • Restores mounting functionality
  • Glass with pre-applied motor mount
  • Redi-Set-Go® replacements do not auto dim
  • Shape verification required
  • Measurements required
  • Backing plate removal instructions included
  • RSG

  • Heated RSG

  • Wide angle RSG

  • Heated Signal RSG

Variant: Redi-Set-Go®

Redi-Set-Go® mirror replacements are complete with a pre-applied motor mount.

  • PART NUMBER: RSG suffixes
  • REPLACES: Heated/un-heated mirror/backing plate
  • AVAILABLE FOR: Driver/passenger
  • INSTALLATION: Varies per part
  • INCLUDES: Mirror with pre-applied motor mount

Variant: Heated Redi-Set-Go®

Heated Redi-Set-Go® mirror replacements are complete with a pre-applied motor mount and heat grid. Your mirror must be originally heated to restore heating functionality. To know if your mirror is originally heated, check for the presence of heater wires behind your OE mirror/backing plate.

  • PART NUMBER: HRSG suffixes
  • REPLACES: Heated OE mirror/backing plate
  • AVAILABLE FOR: Driver/passenger
  • INSTALLATION: Varies per part
  • INCLUDES: Mirror with pre-applied motor mount and heat grid

Variant: Wide Angle Redi-Set-Go®

Wide angle Redi-Set-Go® mirror replacements come complete with a pre-applied motor mount. Burco WRSGs are manufactured using wide angle/aspheric mirror glass and radii separator laser etched into the mirror's reflective coating (if applicable).

  • PART NUMBER: WRSG suffixes
  • REPLACES: Heated/signal OE mirror/backing plate
  • AVAILABLE FOR: Driver/passenger
  • INSTALLATION: Varies per part
  • INCLUDES: Wide angle mirror with pre-applied motor mount

Variant: Heated/signal Redi-Set-Go®

Heated signal Redi-Set-Go® mirror replacements come complete with a pre-applied motor mount, heat grid, and turn signal light module. Your mirror must be originally heated and signaled to restore functionalities. Check for the presence of heater wires behind your OE mirror/backing plate.

  • PART NUMBER: HSRSG suffixes
  • REPLACES: Heated/signal OE mirror/backing plate
  • AVAILABLE FOR: Driver/passenger
  • INSTALLATION: Varies per part
  • INCLUDES: Pre-applied motor mount, heat grid, signal light module

Before You Buy

1 Mirror Anatomy
2 Mirror Types
3 Mirror Variations
4 How to measure your mirror
1 Mirror Anatomy

What's Broken?

MOTOR HEAD ASSEMBLY/ACTUATOR

A Burco mirror replacement cannot connect to a broken motor head/actuator. In most cases, the entire mirror assembly needs to be replaced.

BACKING PLATE/MOTOR MOUNT

Choose a Redi-Set-Go® mirror replacement if your backing plate is damaged or missing. Our Redi-Set-Go® mirrors include a pre-applied motor mount that restores the functionality of your backing plate.

MIRROR GLASS

Choose a Redi Cuts® mirror replacement if just your mirror glass is broken and your backing plate is intact.

MOTOR HEAD ASSEMBLY/ACTUATOR

A Burco mirror replacement cannot connect to a broken motor head/actuator. In most cases, the entire mirror assembly needs to be replaced.

BACKING PLATE/MOTOR MOUNT

Choose a Redi-Set-Go® mirror replacement if your backing plate is damaged or missing. Our Redi-Set-Go® mirrors include a pre-applied motor mount that restores the functionality of your backing plate.

MIRROR GLASS

Choose a Redi Cuts® mirror replacement if just your mirror glass is broken and your backing plate is intact.

2 Mirror Types
flat-mirror
convex-mirror-1
aspheric-mirror
spotter-mirror
trailer-towing-1

FLAT

Typically, flat mirrors are found on your driver's side.

CONVEX

Convex mirrors can be found on your passenger's side. These mirrors are made using curved mirror glass.

ASPHERIC/WIDE ANGLE/EXPANDED VIEW

Aspheric mirrors feature a constant radius for the inner 2/3. The outer 1/3's radius decreases designed to help eliminate blind spots.

TWO-PIECE SPOTTER MIRROR SYSTEM

Spotter mirrors are the smaller mirror in a two-piece mirror system. Yes, we have these 'two'!

TWO-PIECE TRAILER TOW MIRROR SYSTEM

Trailer/tow mirrors are common on trucks and vans. They are convex and positioned in the lower or outside portion of a two-piece mirror system.

3 Mirror Variations

You need to know what type of mirror you have before you can replace it. Use these common symbols to help identify what type of mirror you have. It can be a combination of symbols.

HEATED

These mirrors are heated when your defrost function is turned on. They may or may not have a heated icon. The presence of heat wires is a good indication that your mirror is heated. Burco mirrors with part suffix H come complete with a pre-applied heat grid.

MANUAL ADJUSTED

Manual Mirrors are adjusted by manually moving the mirror.

POWER ADJUSTED

Powered mirrors are adjusted by using powered controls.

AUTO-DIMMING/ELECTROCHROMIC E/C

Auto-dimming or electrochromic mirrors automatically dim to reduce glare. Burco mirror replacements replace OE auto-dimming mirrors but do not auto-dim.

SIGNAL

Signal mirrors feature signal etching in the mirror's reflective coating. The signal is activated when your turn signal is turned on. Burco mirrors with part suffix S come complete with necessary turn signal etching.

CROSS PATH DETECTION

Cross path indicators let the driver know that something is approaching from the vehicle's rear blind spots. Burco mirrors with part suffix C come complete with applicable cross path etching.

BLIND SPOT DETECTION

Blind spot indicators notify the driver that something is in their blind spot. Burco Mirrors with part suffix B come complete with blind spot etched icon.

4 How to measure your mirror
horizontal-redi-cut
horizontal-redi-set-go
vertical-redi-cut
vertical-redi-set-go
redi-cut-diagonals
redi-set-go-diagonals

Horizontal Redi Cuts®

Measure your mirror glass. Measure horizontally from left mirror edge to right mirror edge.

Horizontal Redi-Set-Go®

Measure your mirror's encasement/ rim. Measure horizontally from left encasement edge to right encasement edge.

Vertical Redi Cuts®

Measure your mirror glass. Measure vertically from top mirror edge to bottom mirror edge.

Vertical Redi-Set-Go®

Measure your mirror's encasement/rim. Measure vertically from top encasement edge to bottom encasement edge.

Diagonal Redi Cuts®

Measure your mirror's longest diagonal measurement. This mirror's longest measurement happens to be from the inside upper to outside lower.

Diagonal Redi-Set-Go®

Measure your mirror's longest diagonal measurement. Be sure to include your mirror's encasement/rim. This mirror's longest measurement happens to be from the inside upper to outside lower.

  • Choose below

  • INSTALL CODE 1

  • INSTALL CODE 2

  • INSTALL CODE 3

  • INSTALL CODE 4

  • INSTALL CODE 5

  • Tools Needed

  • Steps For Safety

Choose your code to the left

Your mirror's installation code is printed on the front of your Redi-Set-Go™ box.

Snap tab backing plate removal.

Follow these steps to remove a snap tab backing plate and mirror from your mirror head. Vehicle and glass parts are fragile. Install with care.

Redisetgo_Install1

Watch the Installation Video

Step 1: REMOVE MIRROR & BACKING PLATE

Manually pivot mirror downward by applying pressure to the lower portion of your mirror. Insert a screwdriver above mirror behind backing plate and carefully pry off backing plate snap tabs from the motor head.
TIP: Place a towel on edge of mirror head when prying off backing plate to prevent damage or scratching.

Step 2: DETACH WIRES

If your mirror is a heated variant, disconnect wires from your mirror’s heating element. If applicable, auto dimming wires may have to be disconnected or clipped and capped.
NOTE: Burco® mirror replacements do not auto dim.

Step 3: RECONNECT WIRES & TEST

If your mirror is a heated/signal variant, reconnect heating wires to Redi-Set-Go™ mirror's terminal leads. Test functionalities before proceeding to the next step.

Step 4: INSTALL REDI-SET-GO™

Align motor mount snap tabs with motor. Apply gentle even pressure until motor mount snaps onto motor head.

Step 5: CLEAN UP

Clean your installed Redi-Set-Go™ mirror replacement with glass cleaner.

Slide tab backing plate removal.

Follow these steps to remove a slide tab backing plate and mirror from your mirror head. Vehicle and glass parts are fragile. Install with care.

Redisetgo_Install2

Watch the Installation Video

Step 1: REMOVE MIRROR & BACKING PLATE

Insert a screwdriver below your mirror and carefully slide tab locks off of tab lock guides by lifting/prying upward.
Tip: Lift/pry upward. Do not pry outward.
TIP: Place a towel on edge of mirror head when prying up to prevent damage or scratching.

Step 2: DETACH WIRES

If your mirror is a heated variant, disconnect wires from your mirror’s heating element. If applicable, auto dimming wires may have to be disconnected or clipped and capped.
NOTE: Burco® mirror replacements do not auto dim.

Step 3: RECONNECT WIRES & TEST

If your mirror is a heated or signal variant, reconnect heating wires to Redi-Set-Go™ mirror's terminal leads. Test functionalities before proceeding to the next step.

Step 4: INSTALL REDI-SET-GO™

Vertically align your Redi-Set-Go™ mirror replacement toward the top of the mirror head. Apply gentle downward pressure and slide tab locks onto tab lock guides.
TIP:
For more clearance, pivot motor head downward.

Step 5: CLEAN UP

Clean your installed Redi-Set-Go™ mirror replacement with glass cleaner.

Upper hook lock backing plate removal.

Follow these steps to remove a upper hook lock backing plate and mirror from your mirror head. Vehicle and glass parts are fragile. Install with care.

Redisetgo_Install3

Watch the Installation Video

Step 1: REMOVE MIRROR & BACKING PLATE

Manually pivot mirror and backing plate upward by applying pressure on the upper portion of your mirror. Insert a screwdriver below your mirror and backing plate and carefully pry lower snap locks off the snap lock guides. Once lower snap locks pop off, pull down/out to release the upper hook locks from the hook lock guides.
TIP:
Place a towel on edge of mirror head when prying off lower snap locks to prevent damage or scratching.

Step 2: DETACH WIRES

If your mirror is a heated variant, disconnect terminal leads from your mirror’s heating element. If applicable, auto dimming or signal wires may have to be disconnected or clipped and capped.
NOTE: Burco® mirror replacements do not auto dim.

Step 3: RECONNECT WIRES & TEST

If your mirror is a heated or signal variant, reconnect terminal wires to Redi-Set-Go® mirror replacement. Test functionalities before proceeding to the next step.

Step 4: INSTALL REDI-SET-GO™

Insert upper hook locks into the hook lock guides. Next, apply gentle pressure and snap lower snap locks into snap lock guides.
TIP:
Be sure upper hook locks are fully seated before snapping lower snap locks into place.

Step 5: CLEAN UP

Clean your installed Redi-Set-Go™ mirror replacement with glass cleaner.

Lower hook lock backing plate removal.

Follow these steps to remove a lower hook lock backing plate and mirror from your mirror head. Vehicle and glass parts are fragile. Install with care.

Redisetgo_Install4

Watch the Installation Video

Step 1: REMOVE MIRROR & BACKING PLATE

Manually pivot mirror and backing plate downward by applying pressure to the lower portion of your mirror. Insert a screwdriver above your mirror and backing plate and carefully pry upper snap locks out of the snap lock guides. After the upper snap locks pop off, pull up/out to release lower hook locks from the hook lock guides.
TIP: Place a towel on edge of mirror head when prying upper snap locks off to prevent damage or scratching.

Step 2: DETACH WIRES

If your mirror is a heated variant, disconnect terminal leads from your mirror’s heating element. If applicable, auto dimming or signal wires may have to be disconnected or clipped and capped.
NOTE: Burco® mirror replacements do not auto dim.

Step 3: RECONNECT WIRES & TEST

If your mirror is a heated or signal variant, reconnect terminal wires to Redi-Set-Go™ mirror replacement. Test functionalities before proceeding to the next step.

Step 4: INSTALL REDI-SET-GO™

Insert lower hook locks into the hook lock guides. Next, apply gentle pressure and snap upper snap locks into snap lock guides.
TIP:
Be sure lower hook locks are fully seated before snapping upper snap locks into place.

Step 5: CLEAN UP

Clean the installed Redi-Set-Go™ mirror replacement with glass cleaner.

Ball pivot backing plate removal

Follow these steps to remove a ball pivot backing plate and mirror from your mirror head. Vehicle and glass parts are fragile. Install with care.

Redisetgo_Install5

Watch the Installation Video

Step 1: REMOVE MIRROR & BACKING PLATE

Manually pivot mirror by applying pressure to the lower and side portions of your mirror. Insert a screwdriver behind backing plate and carefully pry off all pivots from their sockets using care not to damage the pins.
TIP:
Place a towel on edge of mirror head when prying off pivots to prevent damage or scratching.

Step 2: DETACH WIRES

If your mirror is a heated variant, disconnect wires from your mirror's heating element. If applicable, auto dimming wires may have to be disconnected or clipped and capped.
NOTE:
Burco® mirror replacements do not auto dim.

Step 3: RECONNECT WIRES & TEST

If your mirror is a heated or signal variant, reconnect heating wires to Redi-Set-Go™ mirror's terminal leads. Test functionalities before proceeding to the next step.

Step 4: RELOCATE ACTUATOR PIVOT PINS TO REDI-SET-GO™

Twist each actuator pivot pin counter clockwise to remove them from the motor head. Snap each actuator pivot pin into its corresponding socket on your Redi-Set-Go™ mirror ensuring that each pin's tabs are properly aligned with the vertical and horizontal socket cutouts.

Step 5: INSTALL REDI-SET-GO™

With the actuator pins set in Redi-Set-Go™ sockets, place Redi-Set-Go™ into the mirror head while setting each pin into its original location. Once actuator pivot pins are set in place, snap main ball pivot into main socket by applying gentle, even pressure to the center of your Redi-Set-Go™ mirror.

Step 6: CLEAN UP

To test mobility, tilt mirror side/side & up/down. Clean your installed Redi-Set-Go™ mirror with glass cleaner.

Tools Needed For Installation

The majority of these tools will be needed to remove your mirror and backing plate from the mirror head/actuator

Step 1: FLAT HEAD SCREWDRIVER

A flat head screwdriver or small pry bar is needed for removal of your mirror from the mirror head/actuator. Please follow steps.

Step 2: TOWEL

Use a towel so prying does not scratch paint. Also works for clean up.

Step 3: GLASS CLEANER

Use glass cleaner to prep surfaces for installation. Distributor exclusive Window Glo™ is recommended for use by glass professionals only.

Safety steps to prepare for installation

Please follow safety steps prior to installation.

Step 1: SAFETY GLASSES

Safety glasses are needed to protect eyes against flying glass or debris.

Step 2: CUT RESISTANT GLOVES

Cut resistant gloves must be worn when handling broken glass.

Step 3: LONG SLEEVES

A long sleeved shirt is recommended.

Step 4: PROPER VENTILATION

When working with adhesives and cleaners, proper ventilation is recommended.

Included is our BREAK-FREE GUARANTEE™

Learn More